Installation on the instrument computers
Only processing-side of Leginon system is needed. This same procedure should be performed on EACH instrument computer you want to use Leginon on. Same procedure is to be repeated if new instrument is added. For situation with the microscope operated at 2 different HT values which gives different magnification set, such as EFTEM mode vs TEM mode, it is better dealt with as different microscope. message#2499 shows how to add a Tecnai subclass to give a new identity to the special mode.
You need to know what microscope and camera you are controlling before starting this.
Package Requirement and Download
Installation Required by all instruments
Configuration related to Leginon
Additional installation specific to the microscope
Additional installation specific to the camera
Additional Setup
Trouble shooting with Python IDLE
Installation specific for FEI Tecnai/Titan/Krios running on 32-bit computer or 64-bit computer
Installation specific for FEI Talos/Arctica/Glacios with pre-installed 64-bit python
Installation specific for JEOL scopes with COM support
Jeol 1230 installation specifics
Hitachi 7800 installation specifics
< Installation Required by all instruments | Additional installation specific to the camera >
_
TVIPS
- Tietz camera installation and setup using directly CAMC4 (older method)
- or Tietz camera installation and setup using EM-MENU scripting (workaround on newer system)
Gatan (CCD/CMOS camera)
Gatan K2
- Gatan K2 installation and setup
- instrument.cfg setup on FEI scope where K2 fakes another camera in order to control the shutter
Gatan K3
FEI Eagle
FEI Ceta
Falcon I or II/Orius Combination
Falcon 3EC
DE-12/DE-20
_
< Additional installation specific to the microscope | Additional Setup > _
< Additional Database Server Setup | Steps needed for Installation Using Database Administration Tools >